need help (Heating Furnace)


  #1  
Old 03-16-14, 11:34 AM
F
Member
Thread Starter
Join Date: Mar 2014
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
need help (Heating Furnace)

everything starts up flames kick on then a few seconds later they shut off. was just working earlier this morning now got a red light blinking .anyone got any suggestions?
 
  #2  
Old 03-16-14, 11:40 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 64,599
Received 3,881 Upvotes on 3,478 Posts
Welcome to the forums.

You have told us absolutely nothing about your furnace..... like make or model. The blinking red light flashes a trouble code that will aid in troubleshooting the problem.
It sounds like it could be a dirty flame sensor rod.
 
  #3  
Old 03-16-14, 11:45 AM
Sharp Advice's Avatar
Admin Emeritus
Join Date: Feb 1998
Location: The Shake and Bake State USA
Posts: 9,927
Upvotes: 0
Received 7 Upvotes on 6 Posts
Hello and Welcome Fonz

Title Edit to denote appliance type.

Would like to offer help but we cannot. Help is physical. But we can offer plenty of advice...
But first we need your help.

Certainly not any where near enough information, details, specifics, brand name and model number to be of much assistance. Help us help you. Provide as much of the requested and needed info as possible so the pros can advise you of all the possible causes and possible solutions.

Use the reply button to add additional information or questions. Using the reply button keeps or moves the topic back up to the top of the list automatically and keeps all communications on this subject in this thread.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: