Need a C wire from Coleman Evcon

Reply

  #1  
Old 12-30-15, 09:51 AM
Member
Thread Starter
Join Date: Dec 2015
Posts: 1
Need a C wire from Coleman Evcon

I have a Coleman Evcon DGAT075BDC and want to install a Wi-Fi thermostat but can't find where to connect the wiring from the thermostat to the furnace to a C lug or spade. I have 2 available wires to use, just need to know where to splice in if possible. I do not have AC on the system.

I do know I can buy a wall 24V transformer for this but don't wish to have to fish wires through the wall to make it look good.

Thanks in advance
 
Sponsored Links
  #2  
Old 12-30-15, 01:54 PM
Member
Join Date: Feb 2014
Location: USA
Posts: 2,103
You can just run a screw into the furnace chassis and attach the C wire to it.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes