Looking for a replacement orifice / holder
#1
Member
Thread Starter
Join Date: Jan 2016
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Looking for a replacement orifice / holder
I'm trying to fix an old Delonghi LP gas heater with a ruined pilot orifice. Have been looking for a compatible spare part but as I don't have as specific part number I can't be sure what I'm looking for.
The orifice holder photo is attached, it's measurements are roughly:
0.311" / 8mm small diameter thread
0.387" / 10mm larger diameter thread
0.905" total length (doesn't matter much really)
I will really appreciate any help identifying what I'm looking for and where to order.
Thanks!
The orifice holder photo is attached, it's measurements are roughly:
0.311" / 8mm small diameter thread
0.387" / 10mm larger diameter thread
0.905" total length (doesn't matter much really)
I will really appreciate any help identifying what I'm looking for and where to order.
Thanks!