Hi all, I own a Palazetti pellet stove (Ecofire model) which reports an error message on start. This message is referring to an exhaust fan problem. The shaft is spinning without any problem. I checked the voltage arriving at motor (230V OK) and at the encoder (+5V ok). So it might be the capacitor which is failing. I need to check it, but as a test, can I bypass it to just known whether the motor starts ? Or can I spin the motor manually enough and power up the stove the launch the motor ? Thanks for your help. [ATTACH]87726[/ATTACH] [ATTACH]87727[/ATTACH] [ATTACH]87728[/ATTACH] [COLOR=Blue]Mod note: member from France.[/COLOR]

New Vine "smart" thermostat. First picture is wiring on furnace, second is wiring on OLD thermostat, third is wiring on new thermostat. When first connecting the new thermostat it will turn on the furnace and blow warm air for exactly 180sec and turn off. Will not stay on in "on" mode or auto set to any temp. Any help would be greatly appreciated since we're having to run space heater until this gets resolved. Thanks in advance! [ATTACH]88012[/ATTACH] [ATTACH]88014[/ATTACH] [ATTACH]88015[/ATTACH] [ATTACH]88016[/ATTACH]