Please help why burner doent burn any gas
#1
Member
Thread Starter
Join Date: Jan 2018
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Please help why burner doent burn any gas
Hi,
my gas burner is stopped working lastnight. As you can see from the video below, the pilot is on, and is trying to opened the gas valve to generate heat, but it always fails. Please suggest what to do to finit.
https://youtu.be/ZVoW5D6Gpko
thank you
my gas burner is stopped working lastnight. As you can see from the video below, the pilot is on, and is trying to opened the gas valve to generate heat, but it always fails. Please suggest what to do to finit.
https://youtu.be/ZVoW5D6Gpko
thank you
#3
Member
Once your pilot is lit you have a flame sensor that sends a signal to the gas valve that says it's OK to open and light the main burners.
If your pilot is lighting I would check your flame senor,( possibly a rod) to see if it's clean and positioned properly to feel the pilot fire and open the gas valve.
Hope this helps a little.
If your pilot is lighting I would check your flame senor,( possibly a rod) to see if it's clean and positioned properly to feel the pilot fire and open the gas valve.
Hope this helps a little.
#4
I see a pilot flame not fully established. That leaves a dirty/plugged orifice. The pilot must be a large bushy flame to establish it's lit.
A model number of the unit would be needed. If it's a furnace.... you'll find it on an ID tag on the side wall near the burner.
A model number of the unit would be needed. If it's a furnace.... you'll find it on an ID tag on the side wall near the burner.