Changing bad blower motor

Reply

  #1  
Old 02-10-18, 09:00 AM
Member
Thread Starter
Join Date: Feb 2018
Location: Kentucky
Posts: 1
Question Changing bad blower motor

I'm changing a bad blower motor. My old motor has the following wires: black= hi, blue=med, red=lo, yellow=capacitor, brown=capacitor, green=ground. My new motor has black=hi, blue=med, yellow=med lo, red=lo, brown x2=capacitor, white =line, green =ground, orange=rotation change, purple= rotation change. I know I don't need the yellow speed wire, but the White "line", my old motor didn't have. Where do I need to connect or run it to? Thanks for the help.
 
Sponsored Links
  #2  
Old 02-10-18, 09:06 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 51,427
Upvotes Received: 214
Welcome to the forums.

Thread moved to the hvac forums.

There should be a wiring diagram on the furnace door but your old motor yellow should be your new motor white.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes