Thermo-dynamic s series oil! Please help!

Old 02-03-23, 08:53 PM
Thread Starter
Join Date: Feb 2023
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Thermo-dynamic s series oil! Please help!

I have a thermo- dynamics s series oil furnace and it will not stay light. I tried to take the base off and vaccum out the I side but still will not stay light opened the black box on top cleaned something still didn't help I live in NE and it is -10 right now. So someone will price gage me especially a women to come help! Any suggestions!
Old 02-04-23, 12:06 PM
Join Date: Oct 2013
Location: United States
Posts: 2,716
Received 132 Upvotes on 124 Posts
Sorry for the bad news but if you don't have at least a little knowledge of burners you will have to pay someone to help.

That box you lifted to clean is your TRANSFORMER and creates the spark that goes to the IGNITORS that lights the oil coming from the NOZZLE. Any one of those things could be the problem aonlg with the CADCELL which is the eye that sits on that BLACK BOX you opened to clean or the OIL FILTER if the service has not been maintained or a simple thing such as air in the line or pump if you ran out of oil or the PUMP STRAINER if you ran your oil low constantly and finally the PRIMARY CONTROL could be defective.

All of these things can be checked pretty quickly with a little bit of testing and knowledge and fixed just as quick.

Hope this helps a little. Good lluck!!

Thread Tools
Search this Thread
Ask a Question
Question Title:
Your question will be posted in: