Trim Shed doors?
#1
Member
Thread Starter
Join Date: Dec 2004
Location: USA
Posts: 8
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Trim Shed doors?
Does anyone see a problem with trimming an inch or 2 off of the bottom of my shed doors in order to accommodate a ramp for a lawn tractor? The doors hang below the floor level and I want to avoid catching the mower deck on the floor as I enter the shed.
#3
Member
Thread Starter
Join Date: Dec 2004
Location: USA
Posts: 8
Upvotes: 0
Received 0 Upvotes
on
0 Posts
The doors/building is already constructed. It came with the purchase of the home. I would cut them so that the seal was still good. Probably install weather stripping on the bottom to make sure water stays out.