Guitar help: bet u haven't been asked this
#1
Member
Thread Starter
Join Date: Apr 2018
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Guitar help: bet u haven't been asked this
Solid body guitar. Mounting pickups to 3"x2" aluminum plates. Need to raise and lower those plates. Total travel .25". Plates need to be secure in all directions at all heights.
Thinking two 'posts' per plate, one on each end with the adjusting mechanism accessible from back of guitar.
Stainless T-nut (4) with set screws into back of body will work but question is what to I attach to the plates? Threaded insert and a spring?
Ideas? Thanks
Thinking two 'posts' per plate, one on each end with the adjusting mechanism accessible from back of guitar.
Stainless T-nut (4) with set screws into back of body will work but question is what to I attach to the plates? Threaded insert and a spring?
Ideas? Thanks
#2
Welcome to the forums.
Nope.... never have been asked that. I don't think you'll get much help without at least posting a picture or two of what you are working with there.
How-to-insert-pictures
Nope.... never have been asked that. I don't think you'll get much help without at least posting a picture or two of what you are working with there.
How-to-insert-pictures