Fan blows when switched from AUTO to ON, but still no heat...


  #1  
Old 12-21-04, 09:20 PM
dougco
Visiting Guest
Posts: n/a
Fan blows when switched from AUTO to ON, but still no heat...

Hi There,

First, let me admit that I am pretty ignorant when it comes to home heating - I know how to change the filter and adjust the thermostat but that's about it.

I have a York Heat Pump and Gas heating: All of a sudden the heat does not turn on when set to AUTO (the fan doesnt blow either). When I set the thermostat to ON the fan blows, but not hot air.

I checked the circuit breaker and all seems good there. I dont notice a pilot light on in the heater (seem to recall seeing one at some point. Also none of the copper pipes are hot except for the time leading to the water heater.

Any advice would be greatly appreciated.

Thanks,
Doug
 
  #2  
Old 12-22-04, 07:14 AM
Jay11J's Avatar
Member
Join Date: Sep 2001
Location: Rochester, Minnesota
Posts: 16,984
Upvotes: 0
Received 0 Upvotes on 0 Posts
See reply in the gas furnace area.
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: