Fan blows but no heat
#1
Member
Thread Starter
Join Date: Nov 2011
Location: usa
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Fan blows but no heat
Hi All,
My heat has stopped working in the house. The fan still blows but the air temp coming out of the register is house temperature.
I recently installed a hunter touchscreen thermostat controller and wired it up according to directions. The heat has been working for a week since I installed it though.
I cracked open the air handler to inspect it. The 5 amp fuse is still ok. The cfm LED last night was flashing 9 times. This morning the LED is staying on for about 9 sec and turning off for about 2 sec. It will continue this cycle.
Does anyone have any suggestions what the error on the board is telling me?
My air handler is a Trane model# TWE049e13fb1
Thanks so much for all your suggestions in advance.
Norrisboat
My heat has stopped working in the house. The fan still blows but the air temp coming out of the register is house temperature.
I recently installed a hunter touchscreen thermostat controller and wired it up according to directions. The heat has been working for a week since I installed it though.
I cracked open the air handler to inspect it. The 5 amp fuse is still ok. The cfm LED last night was flashing 9 times. This morning the LED is staying on for about 9 sec and turning off for about 2 sec. It will continue this cycle.
Does anyone have any suggestions what the error on the board is telling me?
My air handler is a Trane model# TWE049e13fb1
Thanks so much for all your suggestions in advance.
Norrisboat