Connecting Honeywell RTH6350 to Wires
#1
Member
Thread Starter
Join Date: Jan 2015
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Connecting Honeywell RTH6350 to Wires
I have a Honeywell RTH6350 and would like to install it. The old tstat was wired as follows:
Blue. C
White. W2
Red. R
Green. G
Orange O
Yellow. Y
Brown. B
The new tstat has L, E, AUX, G, O/B, NOT USED, Y, R, RC
The manual states that if there is a W2 wire, and there is, to stop and call an electrician. That's where I am. I think the BLUE wire isn't connected. I'm also NOT sure where the BROWN wire goes. Can someone help me?
Thanks
Blue. C
White. W2
Red. R
Green. G
Orange O
Yellow. Y
Brown. B
The new tstat has L, E, AUX, G, O/B, NOT USED, Y, R, RC
The manual states that if there is a W2 wire, and there is, to stop and call an electrician. That's where I am. I think the BLUE wire isn't connected. I'm also NOT sure where the BROWN wire goes. Can someone help me?
Thanks