Wind sensor for Insteon controlled awning


Old 04-29-18, 02:48 PM
Thread Starter
Join Date: Nov 2017
Location: Canada
Posts: 4
Wind sensor for Insteon controlled awning

My motorized awning is controlled by an Insteon 2444-222 Open/Close Micro Module as part of an ISY home automation system. I'd like to add a wind sensor that would close the awning in case of high winds. Before I start down the road of researching such a setup has anyone out there done this already who could give some help?
Sponsored Links
Old 04-29-18, 03:03 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 47,635
Never done that before.

You would need some type of programmable wind sensor.
Otherwise any wind would cause the shade to close.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes