Magnavox 41" loses red color


  #1  
Old 08-30-02, 10:52 AM
mike13502
Visiting Guest
Posts: n/a
Magnavox 41" loses red color

I have a (1991?) magnavox 41" projection tv. when you first turn it on the picture is as clear as when it was new. but after a few mins. ( varys 5-20) the red goes out ( leaving just the green and blue picture) sometimes the red comes back and the picture then will be perfect again, but the red will go out again. once but not too often the blue or green will also go out ( but only after the red goes out) any suggestions???
 
  #2  
Old 08-30-02, 11:02 AM
FREDDYG_001
Visiting Guest
Posts: n/a
mike13502, Sounds like cracked solder joints on the crt boards and or power supply board.




Fred
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: