video game
#1
Member
Thread Starter
Join Date: Nov 2000
Location: NY
Posts: 239
Upvotes: 0
Received 0 Upvotes
on
0 Posts
video game
Hello Folks, I recently was adjusting a 25inch video game monitor. While doing this, I bent a component on the video computer board and when bending it back the middle of 3 prongs broke in the middle. The monitor went black and when I touch them together it works fine. I have soldered these games switches before but, not on the monitor. Do you think it will be ok to solder tihs connection. Thanks in advance for your help. Eric
#2
Member
Join Date: Feb 2003
Location: San Jose, CA
Posts: 164
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Yeah, just put a blob of solder between the broken pins and you're set.
Just don't touch it or move it around thereafter, or you'll probably need to replace it completely.
aaron
Just don't touch it or move it around thereafter, or you'll probably need to replace it completely.
aaron