Insulating Block Building


Old 05-23-00, 07:18 AM
Visiting Guest
Posts: n/a

I have just purchased an above ground block building which I plan to frame out with 2x4's.
It was suggested to me by someone that I put a plastic vapor on both sides of the framing to prevent mold. Have you heard of this? Thanks for your help.

Sponsored Links
Old 05-23-00, 08:48 PM
Visiting Guest
Posts: n/a

Assuming you are putting the wood walls inside the blocks, I would suggest only putting the wrap between the 2X4 walls and the concrete blocks. The wood will dry out over time and needs a place for the moisture to go.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes