Adding baffles to vaulted ceiling attic for blow in insulation - thoughts?
#1
Member
Thread Starter
Join Date: Oct 2008
Location: us
Posts: 17
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Adding baffles to vaulted ceiling attic for blow in insulation - thoughts?
I'm planning on adding more insulation to my attic that has a vaulted ceiling below. Will blow in 12 in of Atticat fiberglas on top of existing batts.
I know I need to add baffles to keep the blown insul out of the soffits... but there is no way I can get a foam baffle down at the exterior wall plate due to the scissor truss angles...wayy too tight for me to get down there.
Any creative ways for me to fashion a baffle that can be put in there?
Thanks
I know I need to add baffles to keep the blown insul out of the soffits... but there is no way I can get a foam baffle down at the exterior wall plate due to the scissor truss angles...wayy too tight for me to get down there.
Any creative ways for me to fashion a baffle that can be put in there?
Thanks
#3
grabber tool - Bing Images
If you use the plastic instead of the foam baffles you'll have a better chance of them not breaking.
Do not buy the cheap folding grabber!
If you use the plastic instead of the foam baffles you'll have a better chance of them not breaking.
Do not buy the cheap folding grabber!