Installing Patio Paver Stones using Brock
#1
Member
Thread Starter
Join Date: May 2017
Location: United States
Posts: 12
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Installing Patio Paver Stones using Brock
Brock 24-in W 36-in L Polypropylene Paver Base Panel
https://www.lowes.com/pd/Brock-24-in...-Panel/3609858
I am using Brock to install Patio Paver stones. Middle of my patio, there is drainage so I need to cut paver stones but my issue is that drainage grates is too much lower so how do I raise it so that it sits on paver stone.
https://www.lowes.com/pd/Brock-24-in...-Panel/3609858
I am using Brock to install Patio Paver stones. Middle of my patio, there is drainage so I need to cut paver stones but my issue is that drainage grates is too much lower so how do I raise it so that it sits on paver stone.
#2
You are going to need a coupling similar to what is in the ground cut off so it can be used to raise the grate upward.