Help Wiring Casablanca Intelitouch
#1
Member
Thread Starter
Join Date: Jan 2006
Location: NY
Posts: 43
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Help Wiring Casablanca Intelitouch
I replaced an older pull switch fan. The ceiling fan wiring was black to black, white to white and ground to ground.
When I installed the intellitouch wall control, I can't get the light to work. The wall switch has one white wire and one black wire. I've tried a few different combinations but each time only the fan turns on even when wired inccorectly (for exaple the light button turns the fan on).
Can someone please help, I've grown prett frustrated. I've tried looking at the manual and the wiring shown on this page: http://www.casablancafanrepair.com/d...ol_wiring.html
With regards to the link, I just have a single black wire and a single white wire (like a light switch).
When I installed the intellitouch wall control, I can't get the light to work. The wall switch has one white wire and one black wire. I've tried a few different combinations but each time only the fan turns on even when wired inccorectly (for exaple the light button turns the fan on).
Can someone please help, I've grown prett frustrated. I've tried looking at the manual and the wiring shown on this page: http://www.casablancafanrepair.com/d...ol_wiring.html
With regards to the link, I just have a single black wire and a single white wire (like a light switch).
#3
Member
Thread Starter
Join Date: Jan 2006
Location: NY
Posts: 43
Upvotes: 0
Received 0 Upvotes
on
0 Posts
The very first one, the W-32. The fan is a Bel Air Halo model.
Wiring for one switch, one fan. NOt sure what 2-way means.
I just realized the fan also doesn't work properly. It only turns on and off meaning one speed or off.
Wiring for one switch, one fan. NOt sure what 2-way means.
I just realized the fan also doesn't work properly. It only turns on and off meaning one speed or off.