I need help getting everthing to work! I replaced a fan/light with a regular light. There are three wires going into the box. One of the wires the white is actually the hot wire. There is three switches that work off this box, but only two work the light. The other is loped in to work an outside porch light. I can make the light work but it is on constantly. All three hots are tied together with the black from the light fixture and the white that is nuetral that is from the panel(because the black from that white is always hot) with the black that is nuetral. The last nuetral is not used. This way the outside light switch works and the new light works but the switches will not turn off it stays on. I have not messed with switches at all. Any suggestions? Thanks Zeb

Hello! I have 10 recessed downlights I need help with please! They are driving me nuts. My experience with these lights are very low. I plan to get a professional to fix these lights, but I would like to know what the problem is and how much it will cost before i invest time and money into it. BUT... here is my issue. Here is what the installation looks like: [IMG]http://s156.photobucket.com/albums/t37/jcs20072008/?action=view¤t=ightceiling123.jpg[/IMG] These lights were installed in 1996. Just recently did the bulbs start to burn out. We tried to order the original lightbulb from Phillips (PL-T) Bulb ([IMG]http://s156.photobucket.com/albums/t37/jcs20072008/?action=view¤t=oldblub2321.jpg[/IMG]), but GE is now the producer of the blub. The bulb that we ordered, which was outrageously expensive, is the GE Biax F26TBX ([url]http://www.grainger.com/Grainger/items/1PGZ9[/url] & [IMG]http://s156.photobucket.com/albums/t37/jcs20072008/?action=view¤t=light1.jpg[/IMG]). We recieved the lights and started to install them. That is when the problem hit. On some lights the bulb will work, others it won't. 5 of the lights will burn the new and old blub just fine, 1 will burn the bulb at what looks like a low voltage or something to the sort but will burn the old bulb fine ([IMG]http://s156.photobucket.com/albums/t37/jcs20072008/?action=view¤t=halfon32143215-2.jpg[/IMG]) and 4 others will not even attempt to burn the bulb when you plug them in neither will it burn the old bulbs. Here is the plugin for the bulbs if it helps: [IMG]http://s156.photobucket.com/albums/t37/jcs20072008/?action=view¤t=plugin2114.jpg[/IMG] What I need to know is how to fix this problem. I have no idea where to even start, but I was hoping to get some help off of here! Any help will be appreicated! Cameron Shaw [email]jc_2002_2008@yahoo.com[/email]