Confused...
#1
Member
Thread Starter
Join Date: Nov 2013
Location: USA
Posts: 1
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Confused...
Ok...so I am trying to put up an outside light at my woodstove so I wont have to carry a flashlight AND try to load the stove at night. I also dont want my wife having to do that should I be away. Went to Lowes and bought a two-light fixture controlled by a switch and hard-wired it in with the breaker for the stove. Made sure I had everything wired right and as long as I leave the switch in the on position, the light works but when I turn it off, its kicking my breaker. Tried another switch thinking the first one was bad, but same result. What am I missing? Only thing I can figure is bad wiring in the fixture...need some help please!!
Ive run my wiring through conduit and made sure I got the right hardware for install (got help from a store associate...very knowledgeable). Any help is appreciated!
Ive run my wiring through conduit and made sure I got the right hardware for install (got help from a store associate...very knowledgeable). Any help is appreciated!
#2
and hard-wired it in with the breaker for the stove.
Made sure I had everything wired right
got help from a store associate...very knowledgeable)