Hi All I had one of the bulbs in my kitchen start to flicker, was driving me nuts so I removed it. The light then refused to work at all. Today I have replaced both starters and both globes but still I get nothing happening. Is it possible I have installed them wrong? What else can likely be wrong? Any help would be much appreciated, been 6 weeks with no kitchen lights now. Thanks

Hello, I could use some help. I am very good with home wiring, etc. but I have not done much with recessed lighting and need a little help in selecting the right products to complete my project please. I do not need to know how to do it as much as I need to know what I need to buy to do what I am trying to do. Here is what I am trying to do: -Install recessed lighting above a shower stall in a bathroom where there is not currently a lighting fixture. -The new lighting fixture will be directly above the shower and is about 3' from the top of the shower stall. -I want a fixture I can install a 5000K LED bulb of my choice in to (to match other LED lighting in the bathroom.) I have sourced several damp/wet location PAR/R/BR/30 bulbs that I can use for the fixture. -The fixture will come into contact with insulation. -I want the project to be to code and be safe for my family and I. What I need to know: -What do I need to purchase as far as a fixture & trim to install the Par/r/br/30 bulb that I described above in the scenario I listed above? Any help would be gladly appreciated. Sources, links, etc would be extremely appreciated. At the end of the day, I just want to know what I need to buy to install a par30 wet location led 5000K long neck light into the area I described or another solution to install a 5000K led light in the above location. Thank you in advance! Michael Hicks, Tallahassee, FL