Housing for recessed ceiling light.


  #1  
Old 01-07-17, 05:21 PM
J
Member
Thread Starter
Join Date: Jan 2017
Location: USA
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Lightbulb Housing for recessed ceiling light.

I changed high ceiling recessed light using telescoping pole with suction cup and 12' ladder. Was able to remove and install new bulb. However, housing that holds bulb was dislodged and is no longer flush with ceiling. Can't get it back into place with pole. Aside from getting 40' ladder and manually pushing housing into place, is there another solution.
 
  #2  
Old 01-07-17, 05:29 PM
chandler's Avatar
Banned. Rule And/Or Policy Violation
Join Date: Dec 2005
Location: USA
Posts: 36,607
Upvotes: 0
Received 9 Upvotes on 8 Posts
Welcome to the forums! Could you post a picture or two of this so we can see what you see? Is it the can itself or the trim ring? http://www.doityourself.com/forum/el...your-post.html
 
  #3  
Old 01-07-17, 05:29 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Jersey
Posts: 65,415
Received 4,049 Upvotes on 3,632 Posts
Welcome to the forums.

Pretty hard for us to help without seeing what you're seeing. http://www.doityourself.com/forum/el...-pictures.html

It sounds like the socket mounting plate slid inside the fixture. This would be caused by the wingnut not being tightened. This is just one style. Pretty common from Halo.

Name:  halo adjustment.jpg
Views: 191
Size:  14.1 KB
 
 

Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description:
Your question will be posted in: