Replacing Halogen With LED

Reply

  #1  
Old 03-16-19, 05:40 PM
Member
Thread Starter
Join Date: Feb 2019
Posts: 8
Replacing Halogen With LED

Replacing 2 pendant lights from ceiling tied to single switch.
both old are Halogen. Replaced 1 with new fixture/light (which is LED).
in removing the first Halogen old fixture noticed that there was a Halogen converter from ceiling wires to fixture. Removed that and put new fixture wires to wires - no converter. Now the new (LED) will not turn on and I still have the second of the 2 old Halogen still up and the Halogen will work.
Thoughts? Do I need a converter for the LED? Or do I need to just replace the other Old Halogen and the new LED (both) should work?
Wondering if 1: the LED needs a converter, 2: the LED and Halogen canít be wired to same switch same time and no LED converters needed, or 3: something more serious with electrical is now wrong.
 
Sponsored Links
  #2  
Old 03-16-19, 06:23 PM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 49,017
Not exactly sure what a converter is. Could be a power supply or a transformer. Many halogen pendant lights run on 12volts. If you remove the transformer...... you should have 120vAC. What does your new LED pendant fixture require ?
 
  #3  
Old 03-17-19, 09:40 AM
Member
Thread Starter
Join Date: Feb 2019
Posts: 8
Itís just a cable to LED bulb. The bulb fitting at end of cable says Max 22 W LED only and the bulb I have is 7W. (Ledare LED 600lm E26 LED1710G7)
 
  #4  
Old 03-17-19, 09:47 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 49,017
That bulb shows as a 120v "A socket" LED bulb.
Does your socket just have that bulb hanging exposed in the air ?
Didn't anything come with the pendant..... instructions.... model number ?

Ledare bulb
 
  #5  
Old 03-17-19, 09:59 AM
Member
Thread Starter
Join Date: Feb 2019
Posts: 8
Yep - IKEA Gothem pendant cable (503.266.47) with bulb at end.

[img]blob:https://www.doityourself.com/c2744373-4a61-4bcc-9998-6134b33dd0e6[/img]
 
  #6  
Old 03-17-19, 11:50 AM
Member
Join Date: Nov 2012
Location: USA
Posts: 3,525
Hi, it should work, try a standard bulb in the socket and see if it works, counter be a bad lamp.
Geo
 
  #7  
Old 03-17-19, 11:54 AM
PJmax's Avatar
Group Moderator
Join Date: Oct 2012
Location: Northern NJ - USA
Posts: 49,017
That image address is the location of the picture on your phones browser. Try following our picture posting instructions. You may need to change your settings to "desktop site".
How-to-insert-pictures

It looks to be very basic to install. If the wiring in the ceiling is live..... that cord should work.
Ikea installation instructions (pdf)
 
  #8  
Old 03-17-19, 01:09 PM
Member
Thread Starter
Join Date: Feb 2019
Posts: 8
Whoops - sorry about image.
and thanks for your help. Figured it out.
There was an extra 3-4 inches of old wire from the Halogen transformer to the ceiling wires. Was connected to the old Halogen wires then to ceiling. Removed the Halogen and went straight to primary ceiling wires and all set.
on another note - the lightbulb nearly does not reach socket when the glass dome/shade is in place. Has to be incredibly tight to get the light to reach and connect. Thought I might crack the dome in getting it tight enough! Beware of fittings and spacing.
all good now though.
Thanks!
 
  #9  
Old 03-17-19, 02:22 PM
Member
Join Date: Oct 2015
Location: Ct.,USA
Posts: 852
Glad you got it working, but wire is wire, If the old halogen was working before the change to LED, the wires connecting 120 vac to the converter was good and should have been good after the converter was removed. Even though the wires providing the 120 vac are not polarity sensitive, code requires the hard wired lamp socket to be connected to the neutral wire.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes