sticky choke on 200 hp Yamaha engine
#1
07-20-05, 07:30 AM
Visiting Guest
Posts: n/a
sticky choke on 200 hp Yamaha engine
Often on startup the choke sticks on my Yamaha after pushing the lever back in requiring pulling the engine cover and manually shutting the choke off or putting in gear and running at low RPM's untill it smoothes out.
Anyone have the same problem or any solutions?
Anyone have the same problem or any solutions?
Sponsored Links
#2
07-20-05, 08:20 PM
Member
Join Date: Jun 2005
Posts: 32
I would check the choke solenoid to make sure the plunger is not the problem. Release the plunger from the choke butterflies and see if the plunger moves freely. Also check the choke plates to make sure they operate smoothly. Do all this manually.
«
Previous Thread
|
Next Thread
»
Linear Mode
