New subfloor in older houseboat
#1
Member
Thread Starter
Join Date: Aug 2006
Location: iowa
Posts: 55
Upvotes: 0
Received 0 Upvotes
on
0 Posts
New subfloor in older houseboat
Without tearing up the exisiting subfloor, which is structurally sound, how can I level the sagging which has taken place between the supports? The supports are about 3 ft apart and span approx. 10-12 ft. The sag is about 3/4" deep and inconsistant between each set of supports.
The house boat is over 35 years old.
The house boat is over 35 years old.
#3
Join Date: Aug 2002
Location: Mountain Williams Missouri
Posts: 17,505
Upvotes: 0
Received 1 Upvote
on
1 Post
Lost here is this a steel hull???? Can you weld in a 1/4" angle from support to
support. Can you jack up off the hull??? below?? If glass 2X4 on edge under it and long screws down into them???
support. Can you jack up off the hull??? below?? If glass 2X4 on edge under it and long screws down into them???