Honda outboard 25 hp rotary steering question

Reply

  #1  
Old 09-05-08, 03:28 AM
Member
Thread Starter
Join Date: Dec 2004
Posts: 4
Honda outboard 25 hp rotary steering question

I just installed a teleflex rotary steering and I need the measurement for the steering link arm. I bought the new system for $119 and don't want to pay $60 for the link arm. It shouldn't take much to make one.
 
Sponsored Links
  #2  
Old 09-06-08, 03:11 PM
Member
Join Date: Jul 2008
Location: Montgomery MN
Posts: 541
It would be wise to buy the honda arm. I think there would be some bends in the arm not just straight and a 90. My reasoning is 60 bucks now beats a broken arm, wild ride when the arm breaks and 60 bucks after it breaks. I'm not saying it can't be done but I would buy the honda arm.
 
  #3  
Old 09-07-08, 03:59 AM
Member
Thread Starter
Join Date: Dec 2004
Posts: 4
Link arm

Thanks, I found a used one for 35.00
 
  #4  
Old 09-07-08, 08:54 AM
Member
Join Date: Jul 2008
Location: Montgomery MN
Posts: 541
Good I would just hate to have one break, that and between time and cost of materials it's not worth making them.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes