Carb setting for 1956 10 HP Evenrude Model 10012


Old 06-22-09, 12:41 PM
FMD is offline
Thread Starter
Join Date: Feb 2007
Location: Saskatoon
Posts: 19
Carb setting for 1956 10 HP Evenrude Model 10012

Picked up an old 10 hp Evenrude (Sportwin) model 10012 at a yard sale. I believe it is an 1956. Can someone tell me the initial setting for the High and Low fuel carb setting?
Sponsored Links
Old 06-22-09, 07:22 PM
Join Date: Jul 2008
Location: Montgomery MN
Posts: 541
I wish I could help but it's 30 years older than anything I have worked on. If you can turn them in as you count the turns and put them back and hope no one messed them up before you.
Old 06-22-09, 07:55 PM
Join Date: Apr 2007
Location: Near Buffalo, NY
Posts: 4,239
I actually remember messing with those settings when I was a kid. The initial low setting is one and a half turns out. The initial high setting is 3 turns out. Fine tune both by first running at full speed and adjusting the high valve, then pull the throttle all the way back to adjust the low.

Those needle valves are easily damaged by over tightening, so don't seat them too hard. Tighten them just until you feel a little resistance.

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes