Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

clinton outboard


littlejim's Avatar
Member

Join Date: Sep 2009
Posts: 1

09-10-09, 06:07 PM   #1  
clinton outboard

I have a clinton engine model# k300 3106a serial# 940555 type xtv52203. Can anyone tell me what size engine and part numbers for points/condenser and coil. Not getting a spark. Any and all help would be greatly appreciated. thanks. ps 1 cyclinder:USAF::USAF::USAF:

 
Sponsored Links
samuari's Avatar
Member

Join Date: Jul 2008
Posts: 541
MN

09-10-09, 06:44 PM   #2  
Welcome to the forum.

I wish I could help but I can't, hopefully someone else will have some info for ya.

 
Rick Johnston's Avatar
Member

Join Date: Apr 2007
Posts: 4,239
NY

09-11-09, 04:36 AM   #3  
Response courtesy of MarineEngine.com
"I believe your type is actually KTV (probably obscured a bit). Your motor is a 1975, single cylinder, 3 horse, built by Clinton for Montgomery Wards (store brand). The fuel mixes at 24:1 - regular unleaded gas and 2 cycle engine oil such as used for lawnmowers and chainsaws - NOT marine oil. You can use an NGK BM4A spark plug gapped at .030" (or a Champion cross ref to that NGK) ... a local small engine shop may be able to help you out since the carbs, points etc were of a fairly generic variety..."

 
Search this Thread