Mercruiser Tach Loose wiring......

Reply

  #1  
Old 06-22-10, 07:45 PM
Member
Thread Starter
Join Date: Dec 2008
Location: Washington PA
Posts: 178
Mercruiser Tach Loose wiring......

My 228 mercruiser's Tachometer cuts in and out (no change in engine speed etc). I have gone behind the dash and the wires seem tight.

The question is where does the tach wire go on the engine?

I will appreciate any help.

Ed
 
Sponsored Links
  #2  
Old 06-22-10, 09:26 PM
Member
Join Date: Jul 2008
Location: Montgomery MN
Posts: 541
I would look at the large round connector on the main harness in the engine bay first. I think the signal comes off the alternator.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes