Trailer Bunks

Reply

  #1  
Old 05-20-18, 10:07 AM
H
Member
Thread Starter
Join Date: Mar 2008
Location: Boulder, CO
Posts: 1,093
Received 3 Votes on 3 Posts
Trailer Bunks

Another question on my 2000 Tracker trailer. The original bottom pressure treated bunks warped and split. I replaced with B-grade redwood 4 yrs ago. It is holding up nicely, but the soft wood won't hold the 3/8 lag screws. They continually loosen and fall out. I tried a SS carriage bolt thru the bunk, with a SS washer and Nylock on the trailer side. That failed because the redwood is too soft to hold the square shank of the carriage bolt, so I can't tighten the nylock. I am now thinking of SS T nuts in the redwood with a SS 3/8 bolt coming up from the trailer. Would probably have to cut the bolts off to get exact length.. Anyone have any other ideas?

As a real far out solution, I like the thought of using plastic decking 2x4's for the bunks, but can't figure how to carpet them.
 
Sponsored Links
  #2  
Old 04-20-20, 09:29 PM
Join Date: Mar 2019
Location: USA
Posts: 59
Received 0 Votes on 0 Posts
When I did mine, I bought the lag bolt washers that have little spikes in them. Used a spade bit to counter sink them deep enough.
 
  #3  
Old 04-21-20, 02:32 AM
M
Member
Join Date: Sep 2019
Location: Canada
Posts: 1,233
Received 121 Votes on 113 Posts
Perhaps try loctite......
 
  #4  
Old 04-21-20, 07:22 AM
P
Group Moderator
Join Date: Mar 2003
Location: NC, USA
Posts: 22,346
Received 433 Votes on 398 Posts
A nyloc nut does not have to be "tight" to work. If you have bolt threads protruding out the nylon end of the nut then it should not vibrate loose even if the bolt is not "tight". If you want extra security you can drill the end of the bolt and put in a cotter pin so even if it comes loose the nut can't come off the bolt. Then, just leave the sleepers as tight as you feel comfortable without crushing the wood but could even be slightly loose.
 
Reply
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
 
Ask a Question
Question Title:
Description: