honda 3 wheeler 200cc pull start

Reply

  #1  
Old 08-15-03, 01:17 PM
benbyit
Visiting Guest
Posts: n/a
honda 3 wheeler 200cc pull start

i posted this in automotive by mistake,but here it is. bought an old 3 wheeler ran and started fine till the pull rope broke and the neighborhood kids push started it for a couple of days. then they told me they couldn't get it started. it doesn't seem to be getting any spark i replaced the rope and put in a new plug but nothing. there is a screw in plug right by the rope pull and i found a washer and rubber type seal of some kind on the engine beside it. is this some kind of spark adjustment? could the kids have tried to adjust it, they know more about this thing than me but claim they never touched it.(haha) anyhelp will be appreciated
 
Sponsored Links
  #2  
Old 08-19-03, 08:58 PM
chevman
Visiting Guest
Posts: n/a
UNDER THE RUBBER SEAL IS THE TIMMING CHAIN TENSIONER, IF IT WAS LOOSENED TOO MUCH IT COULD HAVE JUMPED TIME BUT SHOULD STILL HAVE FIRE UNLESS IT CAME OFF. TRY REMOVING THE CDI COVER ABOVE PULL ROPE ON THE SIDE OF THE HEAD SEE IF IT MOVES WHEN U PULL THE ROPE. IT COULD BE THE MAGNITO THEY GO WILL GO OUT ALL AT ONCE
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes