Yaardmachine by MTD

Reply

  #1  
Old 01-14-08, 02:39 PM
Member
Thread Starter
Join Date: Jan 2008
Posts: 2
Upvotes: 0
Received 0 Votes on 0 Posts
Yaardmachine by MTD

I recently rebuilt the carb on my Yardmachine snowblower.
I dropped the needle valve behind the flywheel and had to remove same. When I got the cover off I noticed a black wire with a white connector going from the coil and sitting next to the gas tank. I could not find anyplace where it should be hooked up. Is this a blank wire or am I missing something?

Regards,

Sarge
 
Sponsored Links
  #2  
Old 01-14-08, 08:27 PM
Member
Join Date: May 2005
Posts: 93
Upvotes: 0
Received 0 Votes on 0 Posts
Not sure where it should plug to but Im pretty sure that is the kill wire
 
  #3  
Old 01-14-08, 08:40 PM
Member
Thread Starter
Join Date: Jan 2008
Posts: 2
Upvotes: 0
Received 0 Votes on 0 Posts
VietSarge

Originally Posted by j400 View Post
Not sure where it should plug to but Im pretty sure that is the kill wire
Thanks for the input, but I thought the kill wire was green?

This is a thick wire (Black) with a white connector or the end
with a male connector on the inside.

Sarge
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes
 
Ask a Question