Hot wire old snowmobile


  #1  
Old 06-06-09, 09:01 PM
R
Member
Thread Starter
Join Date: Jun 2009
Location: Iowa
Posts: 3
Upvotes: 0
Received 0 Upvotes on 0 Posts
Hot wire old snowmobile

I took a snowmobile from my father in laws farm. I had intentions of getting it running. It is a 1976 Ski Moto Futura 440.

I don't have a key for it.

The ignition has the following wires, BAT, LITE, GRD, MAG and one unlabeled in the center of the ignition switch.


To hot wire it which wires would I connect or ground out?

Any help appreciated. Thanks
 
  #2  
Old 06-06-09, 10:01 PM
C
Member
Join Date: Mar 2009
Location: British Columbia
Posts: 111
Upvotes: 0
Received 0 Upvotes on 0 Posts
Disconnect the MAG connection and run the wire to a simple on-off switch grounded to the machine. A tether switch with a lanyard on the wrist would also be a good idea. DO NOT feed battery power to the ignition.
 
 

Thread Tools
Search this Thread
 
Ask a Question