Where does this snow thrower part go?
#1
Member
Thread Starter
Join Date: Dec 2011
Location: Usa
Posts: 2
Upvotes: 0
Received 0 Upvotes
on
0 Posts
Where does this snow thrower part go?
I just replaced the auger belts on my MTD yardman snow thrower
. Put it all together again and it works fine, but I was left with a part I can't identify. It is not listed I the parts diagrams. It is about 5 in
Long! Arched, and has 2 square holes in it. It is very diged up as of exposed to snow / dirt . I'll try to attach a pix. Thanks, Kirby
I can't AT&T. A pix.
. Put it all together again and it works fine, but I was left with a part I can't identify. It is not listed I the parts diagrams. It is about 5 in
Long! Arched, and has 2 square holes in it. It is very diged up as of exposed to snow / dirt . I'll try to attach a pix. Thanks, Kirby
I can't AT&T. A pix.
#2
Welcome to our forums!
Images can't be directly attached to a post but you can upload them to a free host like Photo Bucket and provide a link.
You can also upload them to a free host and use the button above the reply box to have the pics appear in a post.
You can also upload them to a free host and use the button above the reply box to have the pics appear in a post.