Will it fit? (Bicycle Engine)


  #1  
Old 05-17-14, 09:51 PM
M
Member
Thread Starter
Join Date: May 2014
Posts: 1
Upvotes: 0
Received 0 Upvotes on 0 Posts
Will it fit? (Bicycle Engine)

Alright so here I measured my bike frame:

Gyazo - a3f419e8b34faa388c1be85e58fd05dc.png

I am planning to buy this engine kit for it:

Flying Horse Silver Angle Fire 66/80cc Bicycle Engine Kit EPA

It says that "Fits Most 26" Wheeled Bikes (Mountain, Cruiser, Chopper, Road) with V-frame. The frame should have 9-11” of clearance between the bottom bracket and top bar, and the diameter of the frame tubes should be 25-29mm (around an 1”)."

So will that kit fit my bike?
 
  #2  
Old 05-18-14, 05:13 AM
M
Member
Join Date: May 2006
Location: Iowa!!!!!
Posts: 3,846
Received 34 Upvotes on 33 Posts
It looks like everything is pretty "Universal/fits all". I believe I would contact the kit guys directly and get their opinion. Provide not only the measurements but the bike brand/model. They would be the experts on it.

You do want to check out all the regulations and local ordinances on motorized bikes. Most of them don't kick in until you hit a certain speed potential on the bike, but things like lighting, brakes, etc. should be looked at.

I've seen those before. They have been around for ages, but I haven't seen that universal kit. Looks pretty cool.
 
  #3  
Old 05-21-14, 06:10 AM
F
Member
Join Date: Apr 2014
Posts: 108
Upvotes: 0
Received 0 Upvotes on 0 Posts
Here's a link to a good set of instructions:

http://www.scribd.com/doc/5347019/Bi...e-your-bicycle
 
 

Thread Tools
Search this Thread
 
Ask a Question