01 Yamaha warrior nitrous install
#1
Member
Thread Starter
Join Date: Apr 2016
Location: USA
Posts: 4
Upvotes: 0
Received 0 Upvotes
on
0 Posts
01 Yamaha warrior nitrous install
I have a 01 Yamaha warrior I am wanting to put a little spray on.. My only issue is I am on a budget.. I have the bottle and I would assume all the necessary materials.. It is the knowledge I am lacking, I have done kits on drag trucks in the past.. Any know how is much appreciated...
#2
Welcome to the forums.
If you have done it on other trucks then you have most of the install knowledge you need.
You know the risks associated with "pushing" an engine.
Do you have a specific concern or question ?
If you have done it on other trucks then you have most of the install knowledge you need.
You know the risks associated with "pushing" an engine.
Do you have a specific concern or question ?
#4
Member
Thread Starter
Join Date: Apr 2016
Location: USA
Posts: 4
Upvotes: 0
Received 0 Upvotes
on
0 Posts
The only issue I am having is hooking up the solenoid and Go-Baby button .. On the trucks we just did a peddle button and that would be kinda difficult on a quad .. I guess what I am asking is should I run it through the computer or on it's own circuit?
#5
Member
Thread Starter
Join Date: Apr 2016
Location: USA
Posts: 4
Upvotes: 0
Received 0 Upvotes
on
0 Posts
It is 4-stroke , but not sure about the oil injection part .. I already poped the head off once and in turn up graded some stuff .. I ported and polished the head along with machine matched my valves, stage 2 hot cam , new timing chain and larger timing gear , 85mm big bore piston , and cold air intake and a 1 7/8in white brothers exhaust.. Dynoed at 84+/- hp on just motor... That is my biggest concern and fear is blowing it sky high first time out after all the work I have done .. Thank you for the response , I will definitely check into that ..
#6
what I am asking is should I run it through the computer or on it's own circuit?
#7
Member
Thread Starter
Join Date: Apr 2016
Location: USA
Posts: 4
Upvotes: 0
Received 0 Upvotes
on
0 Posts
That is correct.. I am having a hard time finding somewhere convenient and out of the way for the button.. I was also wanting to put a ready light for perfect execution ...