Removing Exhaust Header Bolts without Breaking Them

Reply

  #1  
Old 01-13-18, 07:14 PM
Member
Thread Starter
Join Date: Dec 2013
Posts: 72
Removing Exhaust Header Bolts without Breaking Them

HI Guys, anyone have a good procedure to get this out without risking breaking them off. Thanks!
 
Attached Images  
Sponsored Links
  #2  
Old 01-14-18, 12:39 AM
Gunguy45's Avatar
Super Moderator
Join Date: Dec 2007
Location: USA
Posts: 20,671
Soak it, soak it, then soak it some more with something like PB Blaster or Liquid Wrench, giving it a rap with a small hammer from time to time. Give it a couple of days to work. Spray it multiple times and give it a rap. After a few days, gently try loosening it with a tightly fitting allen head socket. You can try tightening it slightly first also, then see if it backs out. If it doesn't, you'll need to apply heat directly to the head of the bolt with a propane torch and try it again. Don't force it or you may snap the head and then you'll be looking at a machine shop job.
 
  #3  
Old 01-14-18, 04:23 PM
Member
Join Date: Nov 2012
Location: USA
Posts: 583
Agreed, you want to prep it with a penetrating solvent.

I disagree on one thing - I usually use a torch on the block AROUND the bolt,
but I apply ice cubes to the bolt head-
Idea being, I want the threaded hole in block to expand, I want the bolt to contract.

You go through a fair amount of ice cubs, and want to wear leather work gloves since you'll be close to the hot engine.
Or, try applying ice cubes to the heads of the bolts just after you shut down the engin.
 

Last edited by Hal_S; 01-14-18 at 04:38 PM.
  #4  
Old 01-14-18, 06:33 PM
Member
Thread Starter
Join Date: Dec 2013
Posts: 72
That's a great idea. Can I just run the bike to get it hot, then cool the bolt heads with ice or water..
 
  #5  
Old 01-15-18, 04:45 AM
the_tow_guy's Avatar
Group Moderator
Join Date: Feb 2001
Location: SW Fla USA
Posts: 11,477
Whichever method you use, apply some anti-seize to the threads on re-installation for easier removal next time.
 
Reply


Thread Tools
Search this Thread
Display Modes
Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -7. The time now is 12:33 PM.