Carb Rebuilding Question


Old 09-05-02, 07:02 PM
Ken S.
Visiting Guest
Posts: n/a
Walbro rebuild...


I purchased a rebuild kit for a WALBRO W275 carb. (from 2 cycle string trimmer). Unfortunately, there were no instructions included. Can you help me get my hands on some instructions to rebuild this carb. as I would like to attempt to rebuild it myself.

Ken S.
Sponsored Links
Old 09-05-02, 11:36 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,817
Hello Ken!

Sorry to say that I dno't even know if such instructions exist. Just take the carb apart, noting where each piece went...even sketching it on a piece of paper if necessary, clean it well with carb cleaner, blow out all passages with compressed air, and reassemble using the new parts. If you run into trouble, let me know. I know these carbs quite well.
Old 09-06-02, 05:39 AM
Visiting Guest
Posts: n/a
Just make some notes when disassembling as to the correct placement of the various gaskets and the diaphragms......Mike

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes