Chain Saw Problem

Reply

  #1  
Old 10-02-02, 08:33 PM
fly944
Visiting Guest
Posts: n/a
Mcculloch, Again

I just refreshenned my chain saw, McCulloch 3216. This consisted of new Chain, Fuel lines, filter, and spark plug. Ater doing this I tried cleaning the carb, still rough, then I fooled with the high and low mixture settings and cant seem to get it to run much at all. Any suggestions would be greatly appreciated. I just dont want his one to beat me!
 
Sponsored Links
  #2  
Old 10-02-02, 09:01 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
Hello Fly944!

Have you checked your exhaust port and exhaust for restrictions and carbon buildup? Start with both mixture screws backed out about 1 1/2 turns each. Fine tune from there.
 
  #3  
Old 10-02-02, 09:28 PM
fly944
Visiting Guest
Posts: n/a
thanks

Thanks cheese haven't tried the exhaust side yet. Ill do that tomorrow. Thanks.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes