Welcome to the DoItYourself Forums!

To post questions, help other DIYers and reduce advertising (like the one on your left), join our DIY community. It's free!

Starting Problem


racer's Avatar
Visiting Guest

Posts: n/a

10-18-02, 06:48 PM   #1  
racer
snowblower won't start

I am repairing a craftsman snowblower and there is fire and I cleaned the carb and it still won't start. I checked the fuel flow and it is good but it is blowing fuel out the carb when i turn it over. I tried pouring fuel in the spark plug hole and it will kick but won't start. The carb has a primer and choke on it. When the guy brought it to me it was blowing fuel out the side of the carb when I would prime it. What would be the problem?

 
Sponsored Links
cheese's Avatar
Forum Topic Moderator

Join Date: Jul 2001
Posts: 16,573
GA

10-18-02, 07:08 PM   #2  
Hello racer!

If visible fuel is actually blowing back out of the carb, then you have a problem with the needle valve, seat, and/or float. I would reccomend replacing all 3. Let us know how it goes!


"Who is John Galt?" - Ayn Rand (Atlas Shrugged)

God bless!

 
Search this Thread