Engine Ignition Problem

Reply

  #1  
Old 03-22-03, 12:56 PM
Popscallw
Visiting Guest
Posts: n/a
No spark on Echo PB400E Backpack Blower

I have a PB 400E WHICH HAS NO SPARK AT THE PLUG. Is there a way to check the coil or do you have other suggestions?? Therew is a kill switch in the handle which grounds out the spark I have disconnected it and still no spark
 
Sponsored Links
  #2  
Old 03-23-03, 05:11 PM
MrWrench
Visiting Guest
Posts: n/a
The PB400E If I remember correctly has a 2 piece ignition coil. It's been awhile but I think you have to remove the engine from the blower housing to get to them. Check the wiring from the coils for obvious flaws. Before you take the unit apart, try a new plug. also check the sparkplug boot to make sure the wire tang that snaps on the sparkplug hasn't pulled out of the ignition wire.
 
  #3  
Old 03-23-03, 06:40 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,813
I agree...one place to check is where the kill wire runs through the handle. Make sure it is not grounded.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes