chainsaw

Reply

  #1  
Old 04-27-03, 05:21 PM
racer
Visiting Guest
Posts: n/a
chainsaw

A guy brought a old chainsaw in to my shop to get it fixed. It will start and run until it gets warmed up and then it will quit. But after it sits for a while it will start again. Where should I start to look for the problem and can I still get parts for this saw? It is a Skilsaw model 1612c type4.
 
Sponsored Links
  #2  
Old 04-27-03, 07:03 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,821
Check for a bad fuel cap...It may be developing a vacuum in the tank. Try loosening the cap when it begins to stall. It could also be running too lean, or developing a leak in the crankcase cover when the parts expand.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes