2 Cycle Carb Adjustment

Reply

  #1  
Old 05-29-03, 08:56 PM
rogerh's Avatar
Member
Thread Starter
Join Date: Nov 2002
Location: Quincy
Posts: 233
STIHL fuel problem

I have a STIHL brushcutter FS80 that is about 15 years old. Couldn't get to start. Found bad diaphragm and replaced it. Now after it starts I can't get it to accelerate without dying. Strangely, if I cover the air filter air intake holes with tape I can accelerate it but it still don't run good. I have tried to adjust the carb. with no luck. Can anyone give me an idea what the problem is?
 
Sponsored Links
  #2  
Old 05-29-03, 10:35 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,818
Sounds like the engine is leaning out. Check your fuel filter, lines, and carb screen. Also make sure the carb is cleaned out well.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes