homelite chain saw

Reply

  #1  
Old 09-29-03, 10:56 PM
ripperdog3
Visiting Guest
Posts: n/a
homelite chain saw

i have a homelite chains saw super 2 . in the oil tank there is a check valve that connects to the oil line and a vent fitting that connects to that (duck bill) my question is the check valve is in the shape of a T when you install the check valve on the oil line should the middle part of theT face down in the tank or point foward toward the bar?
 
Sponsored Links
  #2  
Old 09-30-03, 11:53 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,821
Hello ripperdog!

I can't say off the top of my head. I'll look in the shop and see if I have a super2. If I do, I'll let you know how it goes.
 
  #3  
Old 10-01-03, 09:57 AM
ripperdog3
Visiting Guest
Posts: n/a
thanks just let me know what you find
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes