Eager-1 Carb

Reply

  #1  
Old 11-24-03, 05:47 PM
Member
Thread Starter
Join Date: Oct 2002
Location: usa
Posts: 11
Eager-1 Carb

I have a Eager-1 Craftsman lawn mower that will not start I have a spark so my next step is to check the carb. What is the proper order to disassamble the lawn mover. 6.6 H.P- Model #917.377303
 
Sponsored Links
  #2  
Old 11-24-03, 08:30 PM
cheese's Avatar
Forum Topic Moderator
Join Date: Jul 2001
Location: USA
Posts: 16,815
Hello fiddy dollars!

No need to disassemble the mower. Just remove the carburetor bowl and clean it out. The bowl screw that holds the carb bowl on has tiny holes in it. 2 oppose each other near the head of the screw, one is closer to the end of the screw, and one is down in the center. Make sure these are all cleared out well, and clean.

www.sears.com/partsdirect has a viewable diagram of your engine. Get the model# off the engine, not the mower, and type it in on the site and click "view diagram".
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes