Sears snow thrower

Reply

  #1  
Old 05-19-04, 07:45 AM
Member
Thread Starter
Join Date: May 2004
Posts: 16
Sears snow thrower

I have a Sears Snow Thrower Model 536.887990 and I know it has a Tecumseh engine in it. Can someone tell me what Tecumseh model engine it is? The Sears manual say it's a 9 Horsepower engine but none are listed on the Tecumseh web site?

Thanks
Bill
 
Sponsored Links
  #2  
Old 05-19-04, 09:12 AM
Terminator20's Avatar
Member
Join Date: Aug 2003
Location: USA,Washington
Posts: 865
I was able to pull up your model number on sears website. go to www.sears.com/parts

Put your model number in the box and go from there.
 
  #3  
Old 05-19-04, 11:53 AM
snoman's Avatar
Member
Join Date: Dec 2003
Location: mb, can
Posts: 326
bill
All I could find on your machine was the Sears motor number and it is 143.029.003. Unfortunately I couldn't cross reference it to a Tecumseh number but the Sears number can still get you whatever motor parts that you'll require. If you ever need a parts listing on your blower, go to http://www3.sears.com/ and enter your model number and all the info for that machine is there.

snoman
 
  #4  
Old 05-19-04, 12:34 PM
Member
Thread Starter
Join Date: May 2004
Posts: 16
Thanks for the info. I wonder why there is no cross reference?
 
  #5  
Old 05-21-04, 05:47 AM
puey61's Avatar
Member
Join Date: Apr 2004
Location: Upstate New York
Posts: 3,224
Tecumseh model

Your engine is a 9 horse. Model # - HMSK90, serial # - 156536E.
 
  #6  
Old 05-21-04, 11:14 AM
Member
Thread Starter
Join Date: May 2004
Posts: 16
Thanks for the reply. Where did you find the cross reference?

Bill
 
  #7  
Old 05-21-04, 02:34 PM
Terminator20's Avatar
Member
Join Date: Aug 2003
Location: USA,Washington
Posts: 865
Puey61 runs a small engine shop. He pulled your number up using his computer system. I wish I had his software.
 
  #8  
Old 05-21-04, 03:16 PM
puey61's Avatar
Member
Join Date: Apr 2004
Location: Upstate New York
Posts: 3,224
Term is correct

I do have the luxury of being a shop owner, with all the books, software and knowledge of such. Specifically, I have PartSmart software that cross references Craftsman numbers.
 
  #9  
Old 05-21-04, 05:53 PM
Member
Thread Starter
Join Date: May 2004
Posts: 16
Thank you again for the info.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes