removing mower blade from rider for sharpening
#1
Member
Thread Starter
Join Date: Jul 2001
Location: 63129
Posts: 223
Upvotes: 0
Received 0 Upvotes
on
0 Posts
removing mower blade from rider for sharpening
how do I do this? I know there is a right and wrong way to tip a push mower for servicing? Same for rider? Do I need jack stands? A lift?
#2
If you tip it, don't tip it too far, and make sure the air filter is on the side that is tipped UP. Make sure you have it braced well so that it can't fall on you. Some people raise their mower with a come-along to change blades.