Engin Manual?


Old 01-29-05, 05:50 AM
Visiting Guest
Posts: n/a
Engin Manual?

Hi I have a CRAFTSMAN II Snowblower. In the manual for the unit it says I have a Tecumseh 4-cycle 8.hp engin model HMSK80-155448S does anyone know were I can get the engine manual for it. The unit is getting hard to start so I think either I have clog in the fuel line or the carb is dirty.I have already changed the plug on the unit. Thanks
Sponsored Links
Old 01-29-05, 10:14 AM
snoman's Avatar
Join Date: Dec 2003
Location: mb, can
Posts: 326
Go here http://www.cpdonline.com/692509.pdf
That should be what you want.

Old 02-02-05, 05:46 AM
Ham is offline
Join Date: Jan 2005
Location: South Louisiana
Posts: 42
Is it a L-Head or OHV??
Old 02-08-05, 10:29 AM
puey61's Avatar
Join Date: Apr 2004
Location: Upstate New York
Posts: 3,224
L-head. If you do not want to waste your paper and ink, you can buy the manual at any Tecumseh shop...Part # 740049, for around 9 bucks.
Old 11-25-12, 02:02 PM
Join Date: Nov 2012
Posts: 2
Were you able to get/find the manual? I also need to service my carb.

If possible, can someone post a link to a PDF?

Thank you.
Old 11-25-12, 02:32 PM
Sharp Advice's Avatar
Admin Emeritus
Join Date: Feb 1998
Location: The Shake and Bake State USA
Posts: 10,440
Hello: Robert

This thread is very old...

Notice the date? 01-29-05....YIKES!!!!....

Located in upper left hand corner just above members name Bmarshall.

Best if you repost it in a NEW THREAD. Not a reply to thread.

Also better to include lots more specifics and details too.

Manual of Make, Model and (Brand) with model number also....

Old 12-01-12, 09:43 PM
Join Date: Nov 2012
Posts: 2
Thanks, next time I shall.

Wanted to say thanks all the same.
Found my service information in the forums and my snow thrower is tip top now.

Best regards,


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Thread Tools
Search this Thread
Display Modes