leaf blower problem

Reply

  #1  
Old 04-16-05, 07:39 PM
littleworker's Avatar
Member
Thread Starter
Join Date: May 2004
Location: Sweet Home Tennessee
Posts: 268
leaf blower problem

Alright, we just bought a practically new blower from sears. it is a craftsman 25cc with a top wind speed of 200 mph. i had the blower on its lowest speed and it was still blowing the air tube out. i did tighten the bolts that hold the tube on and it still came apart. i called sears and they said that they would repalce the qhole thing if i borught the reciept in. is there any way that i can fix it without having to replace it?
 
Sponsored Links
  #2  
Old 04-16-05, 07:41 PM
littleworker's Avatar
Member
Thread Starter
Join Date: May 2004
Location: Sweet Home Tennessee
Posts: 268
here is the blower

http://www.sears.com/sr/javasr/produ...nd+Accessories



the piece where the label is on the end of the blower is what is coming out. i think that our blower is an older model of this one but it was rebuilt from the factory, piston, carb, etc. it runs great but just needs the piece to stay.
 
  #3  
Old 04-16-05, 10:27 PM
Member
Join Date: Feb 2005
Location: Michigan
Posts: 335
i have a craftsmen 25 cc and it has a nice lookign hoseclamp on it that helps hold the blower tube in place, a generic hoseclamp might be a cheap effective solution.
 
Reply

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Thread Tools
Search this Thread
Display Modes